Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.
Spares for BMW K1200GT (2006-2008)
| BMW K1200GT 2006-2008 |
| 1157 |
| 4 |
| 152 |
| 112 |
| 282 |
| 820 |
| 1150 ± 50 |
| Injection 46 mm |
| 2,5 |
| 2,9 |
| NGK KR9CI |
| - |
| Duolever fork |
| Cardan |
| - |
| SAE 5W-40 |
| 3,5 L MIN. API SL |
| - |
| DOT 4 |
| 230ML 75W-140 GL-5 |
| 24 |
| 2,55 L |
Reading fault memory with BMW Motorrad diagnostic system | |
Performing bleed test with the BMW Motorrad diagnostic system | |
Oil change in engine and oil tank, with filter | |
Oil change, rear wheel drive | |
Checking front and rear brake fluid level | |
Checking freedom of movement of throttle cable and checking for kinks and chafing | |
Checking coolant level | |
Checking tire pressures and tread depth | |
Checking lights and signalling equipment | |
Function test, engine start suppression | |
Final inspection and check of roadworthiness | |
Confirming BMW Service in on-board documentation |
Reading fault memory with BMW Motorrad diagnostic system | |
Oil change in engine and oil tank, with filter | |
Oil change, rear wheel drive (every 2 years) | |
Checking valve clearance (every 30.000 km) | |
Replace all spark plugs (every 30.000 km) | |
Changing brake fluid in Integral ABS wheel circuit, front and rear | |
Change brake fluid in entire ABS control circuit | |
Checking freedom of movement of throttle cable and checking for kinks and chafing | |
Checking coolant level | |
Checking tire pressures and tread depth | |
Checking ease of movement of side stand | |
Checking ease of movement of centre stand | |
Checking lights and signaling equipment | |
Function test, engine start suppression | |
Brake check for BMW Motorrad Integral ABS | |
Final inspection and check of roadworthiness | |
Checking battery charge state | |
Confirming BMW Service in on-board documentation |
Reading fault memory with BMW Motorrad diagnostic system | |
Oil change in engine and oil tank, with filter | |
Oil change, rear wheel drive (every 2 years) | |
Checking valve clearance (every 30.000 km) | |
Replace all spark plugs (every 30.000 km) | |
Replacing intake air filter | |
Checking front and rear brake pads for wear | |
Checking front and rear brake discs for wear | |
Changing brake fluid in Integral ABS wheel circuit, front and rear | |
Change brake fluid in entire ABS control circuit | |
Checking freedom of movement of throttle cable and checking for kinks and chafing | |
Checking coolant level | |
Checking tire pressures and tread depth | |
Checking ease of movement of side stand | |
Checking ease of movement of centre stand | |
Checking lights and signalling equipment | |
Function test, engine start suppression | |
Lubricating ball-joint clamp and ball | |
Brake check for BMW Motorrad Integral ABS | |
Final inspection and check of roadworthiness | |
Checking battery charge state | |
Confirming BMW Service in on-board documentation |