Handlebar Risers with Offset for BMW R 1200 RS, LC (2015-)

All Bikes

BMW R 1200 RS, LC (2015-) Handlebar Risers with Offset

Handlebar risers with offset: 30mm higher and 21mm closer to the rider

Raising the handlebar by 30mm results in a more upright, much more relaxed seating position. Moreover, the handlebar is brought 21mm closer to the rider which additionally improves driving comfort. The overall result is a noticeable increase in stamina and concentration. Long stretches on the motorway are less nerve-racking.
Fits on original 32mm handlebar.
With EU street homologation!
Also referred to as handlebar risers, handlebar height increase, bar back risers, barbacks.

BMW R1200RS LC

Install Instruction

When mounting the handlebar risers, you have to reposition the clutch cable (see install instruction).
If repositioning the clutch cable is too complex, you can also extend it with our special adapter (part no. 26865), which is sold separately.
Install Instruction Extension Adapter for Clutch Cable
Example video installation instruction for the extension adapter for the clutch cable

If the original brake line is too short or tensioned after mounting the handlebar risers, the brake line can be extended with our special adapter (item no. 26860), which is sold separately.
Install Instruction Extension Adapter for brake line

There is a video for this product - watch here!

Handlebar Risers 30/21mm

Article-No. : 26207

Availability: immediately available Show details

Price: € 110,90
USD: 118,82 $
GBP: 94,97 £
AUD: 181,79 $A
without VAT plus shipping

Adapter for clutch cable
Fits for R1200GS & Adv LC, R1250GS & Adv, R1200RT LC, R1250RT, R1200R LC, R1250R, R1200RS, R1250RS, RnineT (2013-2016), K1600GT & GTL (2016-), K1600B

Article-No. : 26865

Availability: immediately available Show details

Price: € 39,90
USD: 42,75 $
GBP: 34,17 £
AUD: 65,40 $A
without VAT plus shipping

Adapter for brake line
Fits for R1200GS & Adv LC, R1250GS & Adv, R1200RT LC, R1250RT, R1200R LC, R1250R, R1200RS, R1250RS, RnineT (2013-2016)

Article-No. : 26860

Availability: immediately available Show details

Price: € 39,90
USD: 42,75 $
GBP: 34,17 £
AUD: 65,40 $A
without VAT plus shipping

4 pieces stainless steel Allen screw M8 for replacing the special screws

Article-No. : 2534-520

Availability: immediately available Show details

Price: € 11,90
USD: 12,75 $
GBP: 10,19 £
AUD: 19,51 $A
without VAT plus shipping

Questions about this article

I have a BMW sat-nav support installed on the handlebars. Can this support be reinstalled in the same position after the risers are fitted?
Yes, the sat nav can be installed on the handlebar risers.
You can see this in the install instruction:
www.motorcycleparts-hornig.com/downloads/pdf/Montageanleitung_26207.pdf

Why can I not pull the clutch line as it is shown in the video / in the installation instruction?
The clutch line is fixed at the frame (behind the cooler) with a clamp (hose holder). You cannot see this clamp, you can only feel it when you grab along the clutch line with your hand. The holder must be opened and only then you can pull the clutch line (as shown in the video / installation instruction).

Do I need the additional screws (item 2534-520)?
BMW uses special screws with threads in their extended screw heads on the triple clamp in order to mount the navigation system there. If somebody does not want to mount the navigation system there anylonger, our shorter screws (2534-520) can be used. With these screws you do not have any disturbing screw heads with thread on the triple clamp. An elegant solution if you do not want to mount the support of the BMW GPS system on the triple clamp anylonger. Our short screws (2534-520) are not necessary for mounting the handlebar risers.

Ratings

Rating:
The average rating of this product is 5 of 5:
(after 6 Ratings)

Ray B. wrote | 2020-11-10:
Excellent quality handlebar risers and in my opinion the nicest to look at. They were very easy to fit. I re-routed the clutch cable following the instructional video kindly provided by Hornig on this website. There is no need to alter the brake cable. The risers have definitely made the bike more comfortable to ride for me. Highly recommended.

Dave B. wrote | 2019-03-20:
Excellent product,does the job nicely.Very good service from Hornig as usual.A1+++

Andy-y wrote | 2018-11-02:
Just the right amount of back and up so much more comfortable easy to follow instructions good quality item